Wooden Canopy Bed Ideas
Wooden canopy bed – A brother’s bow is actually a set of two rings, an inner band and an outer bow with a buckle screw. The piece of embroidery runs between the two arches that hold the surface so that you can sew more accurately. The arches hold the fabric so efficiently that you can use them to create your own bedside chapel with a lightweight fabric. Bandit netting will create a safari look, or you can use clean colored netting for an airy, romantic feel.
27 Photos Gallery of: Wooden Canopy Bed Ideas
Screw the outer embroidery bow. Remove the inner bow and put it aside. Fold the top wooden canopy bed edge of two 44-inch-wide netting panels over; create a 2-inch bottom. Sew the fold in place along the bottom edge. Leave both ends open so it creates a pocket that resembles the bar pocket on standard curtains. Slide the two pockets on the embroidery arch panels. Adjust the netting so it flows smoothly on all sides of the bow. Replace the inner bow and tighten the outer bow screw.
Tie two pieces of wooden canopy bed decorative ribbon or string have been loaded into the arc, placing one on each side between the two netting panels. Slide the panels back over the knobs to cover them. Drill a control hole in the ceiling with a drill, then screw in an eye hook. Lift the hood up to the hook. Tie the two strings or tie in a knot or bow and hook the knot or bow to the eye hook. Place the netting so that it hangs over the bed as you wish.Tag : wooden canopy bed