Twin Canopy Beds Frame For Master Bedroom
Twin canopy beds frame usually use circular bars installed on the canopy to attach to the fabric of the canopy. Some awnings can hang from the rods in loose loops, but the typical canopy style bed that uses circular rods will have a long cloth tube stitched over the material at the top to hold the rod. The tubes connect to the covers of the four posts. This type of awning also hides the view bar. All the fountains come with the bed.
Spread the awning out on the surface twin canopy beds frame so that it is facing the correct direction, with the shorter sides facing the head and foot of the bed. Insert awning bars, one at a time, into one end of the cloth tube along each upper edge of the canopy. Slide each rod slowly through the tube, soften the wrinkles of the fabric while pushing the bar until the end of the bar appears on the other side. Lift the pavilion by the two long rods with the help of a friend standing on the opposite side of the bed.
24 Photos Gallery of: Twin Canopy Beds Frame For Master Bedroom
Insert a tip of a canopy rod into the mounting hole near the top of the column and hold the rod against the column to prevent the rod from falling out. Flex the rod slightly in the middle to insert the other end of the rod into the mounting hole on the opposite column and then release the rod. Repeat this procedure with the remaining awning bars of twin canopy beds frame.Tag : twin canopy beds frame