Building Wood Canopy Bed
Wood canopy bed is one of life’s luxuries, and it really commands a price when bought. Building your own poster bed will not be cheap, but it will cost significantly less than any other handmade wood bed in the market. A simple, modern design is surprisingly easy to do, and you do not need men’s carpentry skills to do a good job.
27 Photos Gallery of: Building Wood Canopy Bed
Load two 62-inch long planes of 2-in-8 pieces in a row that rest on a 2-inch edge, about 80 inches apart. Position 2 planks of 82-inch 2-of-8 timber over the ends of the planks; the 62-inch wood canopy bed form the corner with the inner edge of the 82-inch plank ends. Square outside 62-inch planks are at right angles to the 82-inch planks, and then attach the planks together with the 3-inch wood screw driven through the side of the 82-inch planks in the perpendicular ends of 62-inch planks each 3 inches. This is the base of the queen size four-poster bed frame.
Insert four 62-inch long 2-in-one frames into the wood canopy bed frame; push them down to level with the floor. There should be two pushed up against each end of the base, and two evenly distributed in the middle; there will be three inches of space from the top of these 62-inch mattress support planks to the top of the bed base. Place an 82-inch 2-by-3 plank flat on the work surface. Place two planks of 80-inch 2-of-4 timber at each end, at right angles to the 82-inch plank. Secure the two planks to 82-inch plank with four wooden screws through each end. Repeat with another two 80-inch planks of 2-of-4 and another 2-of-3 plank of 82 inches for the legs and side of the poster chapel.Tag : wood canopy bed